Hello everyone! In this video we will show you how to change the steering engine on your electric kids car.
Step 1: Remove the screw from the steering wheel
Step 2: After that you can remove the steering wheel
Step 3: Disconnect the cable
Step 4: Now you can turn the car over
Step 5: Remove the screw that holds the front axle
Step 6: You have to remove all the screws from the iron and the plastic part
Step 7: Remove the front axle
Step 8: Remove the steering rod
Step 9: Disconnect the steering engine from the cable
Step 10: Put in the new one, and connect the cables
Step 11: Place the steering rod back to place
Step 12: After that can the front axle go in
Step 13: Make sure the steering rod is in the right place ( see on the video)
Step 14: Screw all screws in, when placing the plastic piece back, make sure the cables are underneath
Step 15: Screw in the nut to stabilize the front axle
Step 16: Plug in the cables from the steering wheel
Step 17: Put the steering wheel back
Step 18: The nut goes to the side where the hole shapes the nut
Step 19: Place the screw in from the other side and screw it in
(This video was demonstrated on the OFFROAD electric kids car)
source
